Philips DTR300/00, User Manual, Page: 85 / 238

English
Quick installation
Please read the safety section before connecting your receiver.
Requirements for fast and successful first installation are as follows:
• You already have an aerial.
• Your aerial is correctly pointed at the terrestrial transmitter
corresponding to your area.
• Your digital receiver connection is according to the diagram above.
• Your TV set is switched on.
- Connect your receiver to the mains.The receiver front display gets
on and the welcome screen appears.
- Press <OK> to proceed.
The Setup screen appears.The selection is on Service scan.
- Select your language and country.
- Press <OK> to start scanning for channels.
During the channel scan, the following information is reported on screen:
• scanning progress,
• number of channels found.
When scanning is successfully completed, a completion message is displayed.
- Press <OK> to start watching TV.
To know more about using your digital receiver consult chapter 6.
QUICK INSTALLATION 3
PHILIPS PHILIPS
to AC outlet
TV set
VCR/DVD
ANT IN
ANT OUT
EXT 1
EXT 2
EXT 1 EXT 2
For optimum configuration
RF Cable
Terrestrial Receiver
DTR 300 sans esp_140205.qxd 14/02/05 16:16 Page 3