Frequently asked questions
50
You set a recording but did not record
what you wanted.
Press Timer to check if an alternate instance was
selected because of conflicts.
You have forgotten your PIN Code
When prompted for your PIN Code, enter the
Master PIN Code. This will allow you to proceed
as well as reset the current PIN Code to its
default value (default is 0000). The Master PIN
Code is 3001. Keep this code secret to prevent
others from using it.
What are Titles and Chapters?
A recorded movie contains titles and chapters,
which are similar to the titles and chapters of a
book. A title is often a complete movie and is split
into chapters, or individual scenes from the movies.
Programmes are recorded as a single title. They
may consist of one chapter or a few chapters
within a title, depending on the recording
settings.
How do I set up titles and chapters?
The Digital Terrestrial Receiver will automatically
create a new title every time you start a new
recording.
The HDD doesn’t respond but the power
is on
Check if HDD is enabled.
Unplug the recorder from the mains. wait for 10
minutes, power on again.
If the problem persist, call your retailer.
Installation
No sound or picture but the front panel
LED is lit in green
• Check the connections at the wall socket
and Digital Terrestrial Receiver
• Check the EXT1 TO TV SCART connection,
or the HDMI connection
The picture on some channels seems to
have been stretched or squashed.
Check the Digital Terrestrial Receiver TV shape
setting, following the information in paragraph
Watching preferences. If you have a wide screen
TV, you may also need to check the settings on
your TV. The display format being managed by
the Digital Terrestrial Receiver, set your TV to
“full screen” or to the similar equivalent setting
(refer to the user manual of your TV set).
The order of the channels has changed.
Refer to paragraph Sort the selected list: to
change the order again.
If you have tried all of the actions suggested
above and could not solve the problem, contact
your customer service adviser.
The message Overheating is displayed on
the front panel
• Unplug the Digital Terrestrial Receiver from
the mains to cool it down.
• Make sure that it is placed on a firm surface,
with the ventilation openings not covered
with items such as newspapers, table clothes,
curtains, etc.
• Make sure that the heat could be evacuated:
the receiver must not be included in a close
cabinet
• If the problem persists, contact your local
Philips Consumer Care Centre
DTR 7510 200910.indd 50
16/10/2009 17:41:10
Summary of Contents for DTR 7510
Page 2: ... 2 ...
