16
EN
Listen to FM radio
Tune to a radio station
1
Press
TUNER
to select FM.
2
Press /
to tune to a specific
frequency.
»
Play starts automatically.
Tip
•
You can press
MODE
/
SCAN
to tune to the next
station with strong reception automatically.
Program radio stations automatically
You can program a maximum of 30 preset
radio stations (FM).
1
In the tuner mode, press and hold
MODE
/
SCAN
to activate automatic
program mode.
»
All available stations are programmed.
»
The first programmed radio station is
broadcast automatically.
Program radio stations manually
Note
•
You can program a maximum of 30 preset radio
stations.
1
Tune to a radio station.
2
Press
PROG
to activate program mode.
3
Press / to allocate a number (1 to 30)
to this radio station, then press
PROG
to
confirm.
»
The preset number and the frequency
of the preset station are displayed.
4
Repeat the previous steps to program
other stations.
Note
•
To overwrite a programmed station, store another
station in its place.
Select a preset radio station
1
In tuner mode, press / to select a
preset number.
Tip
•
Position the antenna as far as possible from TV, VCR, or
other radiation source.
•
For optimal reception, fully extend and adjust the
position of the antenna.
FM stations with RDS
Radio Data System (RDS) is a service that
sends additional broadcast information along
with FM stations.
If you listen to a FM station with RDS signal,
"RDS" displays.
Display RDS information
1
Tune to the desired RDS radio station on
the FM waveband.
2
Press
RDS
/
DISPLAY
on the remote
control repeatedly to switch through the
following information (if available):
•
Radio text message
•
Program type (for example: News,
Sport...)
•
Frequency
•
Stereo/Mono Mode
•
Time
•
Date
Note
•
[NO Radio Text]
,
[NO PTY]
,
[NO Name]
,
[Mono]
,
[00:00:00]
or
[0-0-0000]
displays if no RDS signal is
available.
