9
EN
Prepare the remote control
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine, or fire. Never discard batteries in fire.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Note
•
If you are not going to use the remote control for a
long time, remove the batteries.
•
Do not use old and new or different types of batteries
in combination.
•
Batteries contain chemical substances, so they should
be disposed of properly.
a
b
c
Set clock
Note
•
You can set the clock in the standby mode only.
1
In standby mode, press and hold
PROG/
CLOCK SET
to activate the clock setting
mode.
»
SET CLOCK is displayed.
»
The 12 hour or 24 hour format is
displayed.
2
Press / to select 12 hour or 24 hour
format.
3
Press
PROG/CLOCK SET
.
»
The hour digits begin to blink.
4
Press / to set the hour.
5
Press
PROG/CLOCK SET
.
»
The minute digits begin to blink.
6
Press / to set the minute.
7
Press
PROG/CLOCK SET
to confirm.
Turn on
1
Press .
»
The unit switches to the last selected
source.
Switch to standby
1
Press to switch the system to standby
mode.
»
The backlight on the display panel is
reduced.
»
The clock (if set) is displayed on the
display panel.
To switch the system to Eco Power standby
mode:
1
In standby mode, press and hold for
more than 2 seconds.
»
ECO POWER is displayed.
»
The backlight on the display panel
turns off.
