P R O D U C T D E S C R I P T I O N
5
4
"
W
" button:
Channel down.
5
Red LED indicator:
Is lit whenever the receiver is operating.
Is lit with lower intensity whenever the receiver is in Stand-by mode (*).
6
“
V
” button:
Channel up.
(*): Note: if the LED is slowly blinking, it indicates that a free over the air upgrade of your receiver is taking
place. Do not interrupt this operation which may last several minutes. Wait until the LED stops blinking.
The LED blinks rapidly when receiving remote control signal.
2.2 Rear view
1
TV (*):
SCART (1) socket to connect to your TV set.
2
Digital audio output (*):
Coaxial Digital audio output to connect your HIFI / Audio receiver
system.
3
Serial (*):
RJ 9 socket for serial data transfer during servicing.
4
230V~50Hz 25W max (**): Socket to connect the Mains cord.
5
Label showing the type and serial number of the receiver.
6
VCR (*):
SCART (1) socket to connect your video recorder.
7
L/R Audio out (*):
Left/Right audio-cinch outputs to connect your HIFI / Audio receiver
system.
8
SAT IN (*):
Socket for satellite dish.
1)
SCART is also called Euroconnector or Peritel.
(*):
SELV: Safety Extra Low Voltage.
(**): HV: Hazardous Voltage.
English
4
5
6
7
8
1
2
3
DSR2210-2211GB.qxd 17/11/2005 10:33 Page 5
