Philips DreamStation Go User Manual Download Page 38 | Manualshive

Page: 38 / 56

background image

35

7. Battery Pack

• Battery Pack Fault Alert - The display touchscreen will show a battery with an X

inside (shown below) when a battery fault is detected.

Preparing the Battery Pack for First Use and Recharging

1. Remove the battery pack from the packaging.

2. Plug the end of the AC power cord into the battery pack.

3. Plug the AC power cord into an AC outlet. The battery pack will begin to charge au-

tomatically.

4. Once the battery pack is fully charged, it is ready for use with the DreamStation Go

therapy device.

Notes

• Periodically charge the battery pack if not used regularly.
• Retain your packaging in case you ever need to return your battery pack to Philips

Respironics.

• Before using the battery pack for the first time, you must plug it in until it is fully

charged. This may take up to 5 hours.

Attaching the Battery Pack to the Device

After charging, your battery pack is ready to use. It can either be disconnected from the
AC outlet and used as an external battery pack (standalone mode), or remain plugged
into the AC outlet for a continuous, fully charged battery pack (uninterruptible power
supply (UPS) mode).

To use the battery pack in UPS mode, follow the below steps:

1. Keep the battery pack plugged into the power source and connected to an AC

outlet. This will allow you to use the battery pack continuously without losing any
charge.

«
...
36
37
38
39
40
...
»

Summary of Contents for DreamStation Go

























































Reviews:

No comments

Related manuals for DreamStation Go

Remote Vibra Trainer Advance 2.0

Brand: Pettec Pages: 36

Brand: Petsafe Pages: 8

Seaside Stainless Pet Fountain

Brand: Petsafe Pages: 8

furmates CLOSE TO ME

Brand: Valiant Pages: 8

Brand: VS Sassoon Pages: 20

Brand: ESTELLE Pages: 12

Brand: EUROHUNT Pages: 88

Brand: Joycare Pages: 2

WAG Boarding Steps PM-6H

Brand: WaterDog Adventure Gear Pages: 4

Brand: Petsafe Pages: 73

Anti-Bark Collar

Brand: Petsafe Pages: 44

Brand: D.T.Systems Pages: 20

Brand: Ferplast Pages: 60

Brand: AFrame Digital Pages: 51

Brand: Checkme O2 Pages: 15

Brand: Riva Pages: 12

Gastro+ Gastrolyzer

Brand: Bedfont Pages: 48

Brand: Trixie Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands