Philips DreamStation 2 User Manual Download Page 55

Page: 55 / 68

- 51 -

Service

The device does not require routine servicing.

Warning: If you notice any unexplained changes in the performance of this device,

if it is making unusual or harsh sounds, if it has been dropped or mishan-

dled, if water is spilled into the enclosure, or if the enclosure is broken,

disconnect the power cord and discontinue use. Contact your home care

provider.

8. Technical specifications

Environmental

Operating Temperature

Device: 5° to 35°C (41° to 95°F)

Storage Temperature

-20° to 60°C (-4° to 140°F)

Relative Humidity (operating & storage)

15 to 95% (non-condensing)

Atmospheric Pressure:

Device: 101 to 77 kPa (0 - 2286 m / 0 - 7500 ft)

Physical

Dimensions

273.81 mm L x 158.5 mm W x 84.83 mm H
(10.78 in L x 6.24 in W x 3.34 in H)

Weight (empty water tank without power supply)

1040 g (2.29 lbs)

Service life

The expected service life of the DreamStation 2 Advanced device is five (5) years.
The expected service life of the DreamStation 2 Advanced humidifier water tank is one (1)

year.
The expected service life of the DreamStation 2 humidifier air inlet/outlet seal is one (1) year.

Summary of Contents for DreamStation 2




































































Search results

Summary of Contents for DreamStation 2

Reviews:

Related manuals for DreamStation 2

Brands by name

Popular brands

Philips DreamStation 2, User Manual

Search results

Summary of Contents for DreamStation 2

Reviews:

Related manuals for DreamStation 2

Brands by name

Popular brands