59
EN
programme you want to record is broadcast using
the
t
or
y
key, and press
OK
to select it.
- Press
OK
to confirm.
When a recording timer is active, you cannot change
digital channels, but you can switch to analogue TV using
the
TV/STB
key and zap through analogue channels.
To delete an active timer, press the key sequence
TIMER, 0
.
Modify an existing timer before its activation:
- Select Modify timer from list from the Recording
timers or Reminders sub menu depending on the type
of timer you want to modify.
- Select the timer you want to modify from the list.
- Modify the appropriate settings.
- Press
OK
to confirm.
Delete an existing timer:
- Select Delete timer from list from the Recording
timers or Reminders sub menu depending on the type
of timer you want to delete.
- Scroll to the timer you want to delete from the list.
- Press
OK
to confirm.
Sleep timer
You can set a sleep timer to automatically switch your
receiver to Standby mode after a given time lapse.
Set a sleep timer:
- Select the time lapse after which the receiver should
go to Standby (up to 3 hours) using the
u
or
i
key.
- Press
OK
to confirm.
Disable a sleep timer:
- Select OFF instead of a time lapse.
- Press
OK
to confirm.
Conditional access
Conditional access is used to view information on your
receiver and smart card, including the receiver and
smart card version. It is also used to change your
receiver PIN code.
The PIN code default value is 0000.
DCR 2020_indice1 1/09/05 15:26 Page 59
