background image

52

EN

To select a channel:

- Scroll up or down to the desired channel.

- Press 

OK

.The current programme is displayed in the

background.

- Press 

OK

again to close the list.

Channel banner

Every time you tune to a channel, the channel banner

appears, displaying information on this channel, including

information on the current programme.

The channel banner is displayed for 5 seconds as per

default.This can be adjusted from the Appearance item

of the User Preferences sub menu.

While watching a channel, you can display the current

channel information at anytime by pressing 

INFO

.

Press

INFO

again to get more information about the

current programme. Press 

INFO

a third time to close

the channel banner

Channel Lists

While watching digital TV or listening to digital radio,

you can access existing channel lists by pressing 

FAV

.

Successively press 

FAV

to toggle between the favourite

lists you created and the list of all available channels.The

current channel list is indicated on the left-hand side of

the banner.

When one of the favourite lists is activated, you zap

only through the channels this list contains.

To create and edit your favourite lists, see paragraph

Favourites lists.

TV or Radio mode selection

While watching digital TV or listening to digital radio,

press 

RADIO

to toggle between TV and radio modes.

icon description

alternate audio

language/format
current favourite list
maturity rating locked
scrambled channel
locked channel
subtitles presence
teletext presence

DCR 2020_indice1  1/09/05  15:26  Page 52

Summary of Contents for DCR 2020





































Reviews: