13
7
Press
PROG
/
CLOCK SET
WRFRQÀUPWKH
clock setting.
Turn on
1
Press .
The unit switches to the last selected
»
source.
Switch to standby
1
Press again to switch the unit to
standby mode.
The clock (if set) appears on the
»
display panel.
To switch the unit to Eco Power Standby
mode:
1
Press and hold for more than 2
seconds.
The backlight on the display panel
»
turns off.
Tip
The unit switches to Eco Power Standby mode
after 15 minutes in standby mode.
To switch between standby mode and Eco
Standby Mode:
1
Press and hold for more than 2
seconds.
the
DC IN
jack on the main unit.
the wall outlet.
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
Connect the unit to the power supply.
[
»
AUTO INSTALL PRESS -- PLAY
KEY
](auto install press -- play key) is
displayed.
2
Press
on the main unit to start
installation.
The unit automatically stores radio
»
VWDWLRQVZLWKVXIÀFLHQWVLJQDOVWUHQJWK
When all the available radio stations
»
DUHVWRUHGWKHÀUVWSUHVHWUDGLRVWDWLRQ
is broadcast automatically.
Set clock
Note
You can set the clock in the standby mode
only.
1
Press and hold
PROG
/
CLOCK SET
to
enter the clock setting mode.
[
»
SET CLOCK
](set clock) scrolls on the
screen.
2
Press
/
repeatedly to select 12 hour
or 24 hour format.
3
Press
PROG
/
CLOCK SET
WRFRQÀUP
The hour digits are displayed and begin
»
to blink.
4
Press
/
to set the hour.
5
Press
PROG
/
CLOCK SET
WRFRQÀUP
The minute digits are displayed and
»
begin to blink.
6
Press
/
to set the minute.
English
EN
