English
19
TV
Watching TV
The set can receive both Digital TV (DTV) and
Analog TV (ATV).
1
Check your TV set has been properly connected
and placed. (see
Installation, Connecting TV
antenna/CATV
and
Using the TV Screen
)
2
Press
DTV / ATV
on the remmote control to
select DTV ( Digital TV ) or ATV (Analog TV) (or
SOURCE
on the set).
●
Pressing
SOURCE
can select either digital TV or
analog TV only, depending on the last selected TV
source.
3
To receive cable channel, select HRC, IRC or
STD through the
TV Menu Operation
on the
next page (See “Setting up TV”).
4
The first time you use the TV
, press and
hold
PROG
until the auto scann progress bar
(digital TV or analog TV) appears.
➜
Available channels (DTV or ATV) are
programmed,
➜
After all channels are stored, the first
autostore channel will then automatically play.
5
Press
PRESET / CHANNEL
3 4
to select
your desired channel (on the remote control,
O
P
CH
)
or
Use the
Numeric Keypad (0-9)
on the
remote control to select the channel number
directly. e.g.
Channel 2: Press 0 and then, 2
Channel 10, Press 1 and then, 0
●
For Digital TV, you also need to press
/GOTO
on the remote control to enable sub-channel
selection, then input your desired sub-channel
number.
Helpful hints:
– To receive the cable channels, you must connect
your TV to the cable TV outlet using a CATV cable
(not supplied), and program your TV by select TV
source (HRC, IRC or STD) in the TV menu
according to your region.
Using EPG (Electronic Program Guide) -
Digital TV only
In Digital TV, you can access EPG content which
may include program availability, backgroud
information, etc..
1
In Digital TV, press
EPG
on the remote control
to turn on EPG information.
2
If necessary, use
3
/
4
/
à
/
á
and
OK
on
the remote control to select and confirm your
selection.
3
To turn off EPG, press
EPG
again.
Turning on/off TV caption
●
Press
CC / SUBTITLE
once or more to turn
on or off TV caption (if available), or display
various caption displaying effects.
Selecting audio language (Digital TV
only)
●
Press
AUDIO
on the remote control to select
language spoken on the TV (if available).
Using ERASE/WRITE button on the
remote control
To skip a stored channel
1
Selelect the channel you want to skip.
2
Press once
ERASE/ WRITE
on the remote
control.
➜
The current channel number appears in red.
●
The channel will skip when using
3
or
4
to
select a TV channel.
To restore a skipped channel to be selectable
1
Use the
Numeric Keypad (0-9)
on the
remote control to enter the skipped channel
number.
2
Press
ERASE/ WRITE
on the remote control.
➜
The skipped channel will be selectableusing
3
or
4
.
To store a new channel (Analog TV only)
1
When a new analog channel is found, use the
Numeric Keypad (0-9)
on the remote
control to enter a desired channel number.
2
Press
ERASE/ WRITE
on the remote control.
●
The new channel will be stored.
pg018-pg035_DCD778_37-EngB
9/2/07, 18:50
19
