
Direction of Use
Note
To avoid magnetic interference or unwanted
noise, never place this apparatus and speakers
too close to any radiation devices.
Place this unit on top of a table or mount it on
the wall.
Never place this unit in an enclosed cabinet.
Install this unit near the AC outlet where the
AC power plug can be easily reached.
Connect speakers
Note
For optimal sound, use the supplied speakers
only.
Connect only speakers with impedance that is
the same or higher than the supplied speakers.
Refer to the Speci
¿
cations section of this
manual.
1
Insert the speaker plugs to SPEAKER
OUT (L andR) sockets.
The plug of right speaker to
R
.
The plug of left speaker to
L
.
Connect FM antenna
Tip
For optimal reception, fully extend and adjust
the position of the antenna.
For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL jack.
The unit does not support MW radio
reception.
1
Connect the supplied FM wire antenna to
the FM AERIALsocket on the unit.
Speaker
(Right)
Speaker
(Left)
Connect audio cables
To hear audio from other audio devices as well
as the accompanied speakers, select a preferred
audio connection:
Option 1: Connect through a coaxial cable
Option 2: Connect through analog audio
cables
Option 1: Connect through a coaxial
cable
You can enjoy multi-channel surround sound
from this apparatus when it is connected to a
digital audio device.
1
Connect a coaxial cable (not supplied) to
the
COAXIAL socket on this product.
the COAXIAL/DIGITAL input socket
on the device.
7-3
Summary of Contents for DCD322/12
