background image

English

7

Congratulations on your purchase and welcome

to Philips!

To fully benefit from the suppor t that Philips

offers, register your product at www.philips.com/
welcome.

This set complies with the FCC rules,
Part 15 and with 21 CFR 1040.10.
Operation is subject to the following two
conditions:

– This device may not cause harmful

interference, and

– This device must accept any interference

received, including interference that may
cause undesired operation.

Environmental Information

All unnecessar y packaging has been omitted. We

have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).

Your system consists of materials which can be

recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.

Supplied accessories

– remote control with 1 CR2025 battery
– 3 X iPod dock adaptors
– 1 X certified AC/DC adapter

(Input: 100- 240V ~ 50/60Hz, 1.6A
Output: 29V 

 2.5A; manufacturer: Philips;

model No.:
PAT075A29UL/ OH-1065A2402700U)

– 1  x  AUX cable
– Mounting kit (2 dowels and 2 screws)

Safety Information

Before operating the system, check that the
operating voltage indicated on the typeplate of
your system is identical with the voltage of your
local power supply. If not, please consult your
dealer.

General Information

Where the MAINS plug or an appliance coupler
is used as the disconnet device, the disconnect
device shall remain readily operable.

Place the system on a flat, hard and stable
surface.

Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system.  Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.

The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloths, cur tains, etc.

Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.

No naked flame sources, such as lighted candles,
should be placed on the apparatus.

No objects filled with liquids, such as vases, shall
be placed on the apparatus.

Install this unit near the AC outlet and where the
AC power plug can be reached easily.

The apparatus shall not be exposed to dripping
or splashing.

Excessive sound pressure from earphones and
headphones can cause hearing loss.

Battery shall not be exposed to excessive heat
such as sunshine, fire or the like.

If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens of the disc
unit inside the system. Should this occur, the CD
player would not operate normally. Leave the
power on for about one hour with no disc in the
system until normal playback is possible.

The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.

Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such as
sunshine, fire or the like.

When the system is switched to Standby
mode, it is still consuming some power.

To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.

pg001-026_DC912_37_Eng

8/25/08, 10:33

7

Summary of Contents for DC912




























Reviews: