English
19
Playing Apple iPod
1
Correctly place the iPod in the dock.
2
Press repeatedly
SOURCE
on the main unit to
select iPod mode (or
iPod
on the remote
control)
.
3
Power on your iPod.
4
Select and playback your favourite song/video/
photo on the iPod.
Notes:
– Using the following buttons only (
2;
,
S
/
T
,
VOLUME
and
MUTE
) on the DC912 and its
remote control, you can control some iPod playback
features, such as, Play/Pause, selecting next/
previous track, fast forwarding/rewinding and
changing volume.
– You may also use
/-
and
ÉÅ
on
the remote control to navigate the iPod menu and
confirm a selection.
Charging iPod battery using the
dock
In normal standby or power-on mode, you can
charge the iPod while docking.
Note:
– iPod charging is not available in ECO power
standby mode.
DOCK for iPod
Playing Apple iPod using DC912
The set is equipped with a dock for iPod. By
connecting Apple iPod to the set, you can listen
to the sound of the docked iPod through the
powerful speakers of the Hi-Fi system and view
the iPod video (if available).
Compatible iPod player
●
Apple iPod models with 30-pin dock connector
as follows:
Mini, Nano 1st /2nd/3rd generation, iPod 5th
generation (video), iPod touch and iPod classic.
●
iPod Shuffle is not supported.
Dock adaptor
Before plugging your player in the dock, snap the
suitable dock adaptor (supplied) into the dock to
provide a snug fit for the player to be docked.
Selecting the correct dock adaptor
●
3 iPod dock adaptors are included. Each of the
adaptors fit the iPod models that are indicated
on the adaptor.
Installing the dock adaptor
●
As shown below, align the slots of the dock and
latches of the adaptor, then slide in the adaptor.
Removing the dock adaptor
●
As shown, slide the adaptor up to take it out.
pg001-026_DC912_37_Eng
8/25/08, 10:33
19
