12
EN
6 Other features
Set the alarm timer
You can set two alarms to ring at different time.
Note
•
Make sure that you have set the clock correctly.
1
Press and hold
ALARM 1
or
ALARM 2
.
»
The hour digits begin to blink, and you
can hear one beep.
»
[AL SET] (alarm set) flashes on the
screen.
2
Press / (
TUNE+
/
TUNE-
) repeatedly
to set the hour.
3
Press
OK
/
/
DOCK 2
to confirm.
»
The minute digits begin to blink.
»
[AL SET] (alarm set) flashes on the
screen.
4
Repeat steps 2-3 to set the minute, select
when to ring alarm, and choose alarm
sound source and alarm volume.
After the alarm volume is set, the unit exits
alarm setting, and you can hear two beeps.
Tip
•
If you select DOCK 1/DOCK 2 as the alarm sound
source, when there is no device docked, the alarm will
automatically switch to the buzzer sound.
•
If both alarms are set to the same time, only Alarm 1
will ring.
View the alarm settings
•
Press
ALARM 1
or
ALARM 2
to view
alarm settings.
Activate and deactivate the alarm
timer
•
When an alarm setting is shown on
the screen, press
ALARM 1
/
ALARM 2
repeatedly to activate or deactivate the
timer.
»
If the timer is activated, [ AL 1] or [
AL2] is displayed.
»
If the timer is deactivated, [ AL1] or
[ AL2] disappears.
Snooze
•
When the alarm rings, press
SNOOZE
/
BRIGHTNESS
.
»
The alarm stops, and the alarm icon
flashes.
»
The alarm will resume ringing 9
minutes later.
Note
•
When the units runs on battery power, only the buzzer
can be used as the alarm sound source.
Stop alarm ring
•
When the alarm rings, press the
corresponding
ALARM 1
or
ALARM 2
.
»
The alarm stops but the alarm settings
remain.
Tip
•
If you press and hold /
SOURCE
, the alarm will also
be stopped, and the unit will switch to standby mode.
•
If you do not stop the alarm, it will ring for 30 minutes.
•
When an alarm rings, it begins from a relative low
volume, and rises gradually to the highest alarm volume
in 90 seconds.
