12
You feel that you have missed some calls
Check your call divert options.
When charging, the battery icon shows no bar and the outline is
flashing
Only charge the battery in an environment where the temperature does not go
above 40°C and discharge the battery in an environment where the temperature
does not go above 45°C.
In other cases please contact your phone supplier.
The display shows SIM failure
Check that the SIM card has been inserted correctly. If the problem persists, your
SIM card may be damaged. Contact your operator.
When attempting to use a feature in the menu, the display shows NOT
ALLOWED
Some features are network dependent. They are only available, therefore, if the
network or your subscription supports them. Contact your operator for detailed
information on this subject.
The display shows INSERT YOUR SIM CARD
Check that the SIM card has been inserted correctly. If the problem persists, your
SIM card may be damaged. Contact your operator.
The autonomy of your phone seems lower than indicated on the user
guide
The autonomy is linked to your settings (e.g., ringer volume, backlight duration)
and the features you use. To increase the autonomy, and whenever possible, you
must deactivate features you do not use.
Your phone doesn’t work well in your car
A car contains many metallic parts that absorb electromagnetic waves which can
affect the phone’s performance. A car kit is available to provide you with an
external antenna and enables you to make and receive phone calls without
handling the handset.
Note:
•
Check with the local authorities whether or not you are allowed to use the
phone while driving.
Your phone is not charging
If the battery is completely flat, it might take several minutes of pre-charge (up to
5 minutes in some cases) before the charging icon is displayed on the screen.
The picture captured with the phone camera is not clear
Make sure that the camera lens on both sides is clean.
Specific Absorption Rate Information
International standards
This mobile phone complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This mobile phone has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiated radio frequency
