Philips CT7568/000APMEA, User Manual

Page: 13 / 83

12 Calling
Setting a Quickcall contact
1. In idle mode, press
+
to access the
Quickcall
screen. Select a thumbnail to configure and press
,
or
L Set
.
2. Select a name in the contacts list, and press
,
again to access the
Picture album
and select a
picture. Proceed the same way for each
thumbnail.
Calling a Quickcall contact
To make a call, press
+
when in idle mode, then select
the thumbnail of your choice and press
(
.
To reconfigure a thumbnail, select it and press
,
to
Replace
the name and/or picture.
If a picture is already associated with a contact, it is
displayed in the
Quickcall
screen. Changing the
picture in one of the menus will also update it in the
other.
MMS Foto talk
This feature allows you to send a picture via MMS
and to add a sound recording to it. The picture can be
selected from the
Picture album
or can be a picture you
have just taken with the camera.
1.
Take a picture, then press
Menu
, or select a picture
from the
Picture Album
, then press
,
or
L
Options
. In both cases, select
Send by...
>
MMS.
2. When the
Add sound?
message appears, press
L
Yes
to start recording. Then press
L Save
to
stop and save your recording, or
R Cancel
.
3. Rename the picture if you wish or press
L OK
.
4. Select a contact in the list that appears and then
Add media
to go to the MMS creation screen.
Press
L Send
to send your message, or modify it
as you want before sending it (see “New MMS”
on page 46 for more information).
Handling multiple calls
The ability to handle two or more calls at one time
and to make conference calls is dependent on your
operator and/or subscription.
Making a second call
You can make a second call during an active call or
with a call on hold. While on the phone, dial a
number (or select a contact in the phonebook) and
press
(
. The first call is put on hold (the number is
displayed on the bottom of the screen) and the second
number is dialled. You can then press
OK
to access the
options among which are:
•
Switch calls
to toggle between calls (you can also
press
<
or
>
to switch calls).
•
Transfer
to connect the two calls. You are
disconnected when the transfer is completed.