Philips CPWBS001, Instructions For Use Manual

Page: 20 / 64

Configuring Your Computer in Windows 2000
DHCP IP Configuration
1. Access your Network settings by clicking Start, then choose Settings and
then select Control Panel.
2. In the Control Panel, locate and double-click the Network and Dial-up
Connections icon.
3. Locate and double-click the Local Area Connection icon for the
Ethernet adapter that is connected to the Wireless Base Station. When
the Status dialog box window opens, click the Properties button.
4. In the Local Area Connection Properties box, verify the box next to
Internet Protocol (TCP/IP) is checked.Then highlight the Internet
Protocol (TCP/IP), and click the Properties button.
5. Select “Obtain an IP address automatically” to configure your computer
for DHCP. Click the [OK] button to save this change and close the
Properties window.
6. Click the OK button again to save these new changes.
7. Reboot your PC.
8. To obtain new network settings see “Obtain IP Settings from Your
Wireless Base Station”.
ENGLISH
20