Philips CoolSkin HQ6762, User Manual

Page: 2 / 96

Important
Read these instructions for use carefully before
using the appliance and save them for future
reference.
◗
Only use the HQ8000 powerplug and the
charging stand supplied to charge the shaver.
◗
The powerplug is suitable for mains voltages
ranging from 100 to 240 volts.
◗
The powerplug contains a transformer. Do
not cut off the powerplug to replace it with
another plug, as this will cause a hazardous
situation.
◗
The powerplug transforms 100-240 volts to
12 volts.
C
◗
Make sure the HQ8000 powerplug and the
charging stand do not get wet.
C
◗
The shaver runs at a safe low voltage of 12
volts. It is watertight and can be cleaned
under the tap. Do not rinse the shaver with
water hotter than 80
c
C.
◗
For the best shaving results, shaving emulsion
should be pumped up frequently.
◗
If the mains cord of this appliance is damaged,
it must always be replaced by Philips or a
service centre authorised by Philips in order
to avoid hazardous situations.
ENGLISH
4