– 3 –
TV ANTENNA
Indoor Antenna Hookup
Your TV has a rod antenna.
1. Extend the antenna and rotate it until you get the best TV picture.
VHF/UHF Outdoor Antenna Hookup
* Shorten the rod antenna, then lower the rod antenna into place on
top of the TV.
1. If the outdoor antenna has flat twin lead (300 ohm) wire, connect the
ends of this wire to the two screws on the adaptor (supplied). Push
the plug of this adaptor into the TV external antenna (EXT. ANT.)
jack.
2. If the outdoor antenna has two twin lead wires or one round (co-
axial) cable, purchase an appropriate adaptor from your dealer.
Connect the antenna wires and/or cable to the adaptor, then plug
the adaptor into the TV external antenna (EXT. ANT.) jack.
EXT.ANT.
TINT COLOR
UHF/VHF
Antenna
300 ohm
Flat Twin
Leads
75 ohm
Coaxial Cable
75 ohm to 300 ohm
Adaptor
(optional)
Adaptor (supplied)
Part # 4835 142 17005
or
To order any optional accessories call Philips Service Solutions Group
at 1-800-851-8885.
