Philips Cineos 42PF9630, User Manual

Page: 11 / 28

9
& Select
Demo
in the Main menu with the cursor down.
é
Select Auto demo or one of the features with the cursor right and press
the
OK
button on the remote control.
If
Auto demo
has been selected the demo will automatically present all the
features sequentially in a loop. Press one of the cursor buttons to stop the
Auto demo.
If one of the features has been selected, this particular feature demo will run
one time only, until activated again, and the Demo menu will reappear.
Digital processing, Light sensor and 3D Y/C Comb filter On or Off
Select
Digital processing, Light sensor
and
3D Y/C Comb filter On
or
Off
to really see the difference in picture quality.
In Dealer Demo mode it is possible to change channels with
- CH +
and to
adjust the volume.
Note: the Dealer Demo is not part of the automatic sequence and can only be
activated separately.
Auto demo
...........
Dealer demo
- Digital processing
- Light sensor
- 3D Y/C Comb filter
TV
Settings
Demo
Install
Source
AV1
AV2
HDMI
Side
Center input
(Center In Vol.)
Settings
& Select
Source
with the cursor right.
é Press the cursor down to select one of the external AV inputs.
“
Press the cursor right to enter the list of types of devices attached to the
selected input.
‘ Select the accessory device with the cursor up/down.
Once you have named the source, e.g.VCR, this source will automatically be
selected when your remote control is in VCR mode, see p. 3, and when you
press the
AV+
button on the remote control.
(
Press the
MENU
button on the remote control to turn off all menus on
screen.
§
Keep the AV+ button
on the remote control
pressed and then p
ress this
button repeatedly.
The Source Select menu appears in which you may select a source or
peripheral connected to be displayed on screen.
Center input - Center in volume
When you have connected a multichannel surround receiver to the TV, the
loudspeakers of the monitor can act as center speaker, making a separate
center speaker unnecessary.
Select
Center input On.
When having selected On you can adjust the Center In Vol. with the
cursor left/right to correct volume level differences of the external audio
receiver and speakers.
Clock
Time
Day
Settings
& Select
Clock
with the cursor right and press the cursor down to select
Time or Day .
é
With the cursor buttons, enter the correct time and day, which afterwards
can be selected with the
CLOCK
button on the remote control, see p. 3.
Demo
Source
Clock