9
English
3 Get
started
Caution
Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in
sequence.
]G
model and serial number of your apparatus. The
model number and serial number are on the
bottom of your apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Install the car audio
These instructions are for a typical installation.
^!
make the corresponding adjustment. If you have
your Philips car audio dealer.
Caution
This unit is designed for negative ground (earth) 12 V
DC operation only.
Always install this unit in the car dashboard. Other
locations can be dangerous as the rear of the unit heats
up during use.
! J?
the ignition is off.
Ensure that you connect the yellow and red power
supply leads after all other leads are connected.
Ensure that all loose leads are insulated with electrical
tape.
Ensure that the leads do not get caught under screws
orin parts that will move (e.g. seat rail).
Ensure that all ground (earth) leads are run to a
common ground (earth) point.
Use only the supplied mounting hardware for a safe
and secure installation.
] "
Skip track.
Fast backward/forward playback
d
SOURCE
Select audio source.
e
EQ
Select equalizer (EQ) settings.
f
OFF / /
Turn the unit on or off.
Mute or restore volume.
EN
