13
Connector
Connect to
1 Blue/white
wire
The electric antenna
control lead or power
supply lead of the antenna
booster
If there is no electric
antenna or antenna booster,
or it is manually operated
telescopic antenna, it is not
necessary to connect this
lead.
2 Pink wire
Reverse driving (see
‘Connect reverse driving
cable’ on page 14 )
3 Yellow wire
The +12V car battery
which is live at all times
.
4 Blue wire
Amp. remote
5 Black wire
A metal surface of the car
First connect the black
ground (earth) lead, then
connect the yellow and red
power supply leads.
6 Red wire
The +12V power terminal
which is live in the
accessory (ACC) position
of the ignition switch
If there is no accessory
position, connect to the
+12V car battery terminal
that is always live. Be sure
to connect the black ground
(earth) lead to a metal
surface of the car fi rst.
7 Green and
green/black
wires
Left speaker (Rear)
8 White and
white/black
wires
Left speaker (Front)
9 Gray and
gray/black
wires
Right speaker (Front)
Purple and
purple/black
wires
Right speaker (Rear)
8
Red cable
Front line out L
9
White
cable
Front line out R
10
Red cable
Rear line out L
11
white cable Rear line out R
Connect wires: without ISO
connectors
Caution
Ensure that all loose leads are insulated with
•
electrical tape.
1
Cut off the bigger end of the supplied
standard connector.
2
Check the car’s wiring carefully, then
connect them to the standard connector.
2
1
3
4
5
6
7
8
9
0
English
EN
