Philips CD650 User Manual Download Page 52

Page: 52 / 56

Frequently asked questions

contact your operator should you want to
change the settings.

Poor audio quality and the antenna
icon

blinking!

• The indoor and outdoor range of the

phone is up to 50 metres and 300
metres respectively. When the
handset moves beyond the operation
range, the antenna icon

will blink.

My handset keeps going into idle
mode!

• If there are no key presses for 30

seconds, the handset will automatically
return to idle mode. It will also return
to idle mode automatically when you
place the handset back on the base
station.

Phonebook entry cannot be stored
and Memory full is displayed!

• Delete an entry to free memory

before saving your contact again.

The Master PIN code is wrong!

• The default master PIN is 0000.
• If it has been changed before, and you

cannot remember the new one, reset
the handset to revert to the default
master PIN code (see “Reset Unit” in
chapter 8.9).

CD650_IFU_EN_UK.book Page 50 Monday, June 23, 2008 3:42 PM

Summary of Contents for CD650

























































Search results

Summary of Contents for CD650

Reviews:

Related manuals for CD650

Brands by name

Popular brands

Philips CD650, User Manual

Search results

Summary of Contents for CD650

Reviews:

Related manuals for CD650

Brands by name

Popular brands