26
EN
Un-registering a handset
A handset can un-register another handset registered to the same base. It cannot un-register itself.
1. Press .
2. Select
ADVANCED SET
and press
OK
.
3. Select
DELETE HS
and press
OK
.
4. Select the handset you would like to un-register and press
OK
.
5. Enter the Base PIN (by default 0000) and press
OK
to confirm.
Changing the Base PIN
A PIN (personal identification number) code is required to access the registration, delete handset, and reset
mode.
The factory preset code is “0000”. You can change it to a unique code of your own. A PIN code can be up to
8 digits long.
1. Press .
2. Select
ADVANCED SET
and press
OK
.
3. Select
CHANGE PIN
and press
OK
.
4. Enter the current Base PIN and press
OK
.
5. Enter the new Base PIN and press
OK
.
6. Repeat the new Base PIN and press
OK
to confirm.
Resetting
You can reset the display, sounds, and other settings of your phone. Refer to the section page 30.
1. Press .
2. Select
ADVANCED SET
and press
OK
.
3. Select
RESET
and press
OK
.
4. Enter the Base PIN and press
OK
to confirm.
Selecting country*
*country dependent
The correct country setting properly configures your phone to the correct network and language settings of
the country that you are currently in.
1. Press .
2. Select
ADVANCED SET
and press
OK
.
3. Select
COUNTRY
and press
OK
.
4. Select the desired country and press
OK
to confirm.
Note :
If you have your handset serviced, please make sure it is unregistered from the base station
before taking it back to the repair centre.
At least one handset must stay registered on the base.
Note :
You will hear a reject tone if the new PIN is not repeated correctly. Follow steps 3 to 7 and try
again.
Warning:
Please note that after a reset all your personal settings will be deleted, however your
phonebook and call log entries remain unchanged.
Advanced features
Summary of Contents for CD230
Page 1: ...User manual Charge the handset s for 24 hours before use ...
Page 34: ......
