10
EN
You will need to register your handset if it shows
UNREGISTERED
in the display or if you wish to register
the handset to a different base unit. You can register up to 4 handsets on a single base, and you can register a
handset to 4 bases.
To register your handset :
1. Press .
If your handset displays
UNREGISTERED
, go to step 5.
2. Select
ADVANCED SET
and press
.
3. Select
REGISTRATION
and press
.
4. Before you enter the PIN code, press and hold the PAGING key
on the base for 4 seconds. The
base is now in the registration mode. (If the base is full and cannot take on any more handset, you will not
be able to register. See “Un-registering a handset”, page 26 to delete a currently registered handset.)
5. Enter the PIN code (default: 0000) and press
.
6. Select a base station using the digit keys 1, 2 , 3 or 4. A blinking digit indicates that the base number is
already used.
If the registration failed, follow the procedure and try again.
From standby, press
to enter the menu.
Use
UP/DOWN
to go up or down in the menu list.
Press
Softkey
to confirm the selection.
Press
Softkey
to exit the menu or to go back to the previous menu
level.
Using the menus
Registering your handset
Summary of Contents for CD230
Page 1: ...User manual Charge the handset s for 24 hours before use ...
Page 34: ......
