29
EN
To change the dial mode*
*Country dependent
The default value of dial mode that is preset in your CD 135 should be the best suited for
your country network and therefore you should not need to change it.
1.
Press
and press Down
to reach
ADVANCE SET
.
2.
Press
and press Down
to reach
DIAL MODE
.
3.
Press
, scroll
to select
TONE
or
PULSE
and press
to confirm.
Local area code setting*
*Country dependent
If your local PSTN sends the CID with local area code attached, it is necessary to filter out
the local area code when dial back from call log. The AREA CODE function allows you to
remove the local area code from the call log entries. The local area code can be set from
1 to 4 digits. The default setting is blank.
1.
Press
and press Down
to reach
ADVANCE SET
.
2.
Press
and press Down
to reach
AREA CODE
.
3.
Press
to view the current setting.
4.
Enter the new area code
(the maximums for the area code is 4 digits) and
press
to
save.
To set or change Call Barring
This menu allows you to limit the use of your phone to specific calls by barring parts
(prefix) of outgoing numbers. You can set 4 different barring numbers.
1.
Press
and press Down
to reach
ADVANCE SET
.
2.
Press
and press Down
to reach
CALL BARRING
.
3.
Press
and enter the PIN code
(by default the PIN code is 0000).
4.
Press
, press Down
to reach
BARR NUMBER
and press
.
Advanced settings
Summary of Contents for CD1351S
Page 1: ...User manual EN Charge the handset s for 24 hours before use ...
Page 45: ......
