Philips CD 140, User Manual

Page: 28 / 32

Frequently asked questions 26
• Use the line cable provided
• Connect the line adaptor
(when needed) to the line
cord
The is blinking.
• Move closer to the base
station
• Check battery level
• Register the handset to the
base station
The appears.
• Replace the batteries with
new ones (use only
rechargeable batteries)
Set-up
Caller ID does not work
properly.
• Check with your local phone
company that the CID
service is subscribed to
• Let the phone ring at least
once before answering
The Call Waiting call
cannot be answered.
• Check with your local phone
company and select the
correct recall duration
The handset displays
nothing, but only the
is
blinking.
• Try again by disconnecting
and connecting the base
station power supply and
follow the procedure to
register a handset (see
Section 3.5)
• Remove and place back the
handset batteries
Sound
Handset does not ring!
• Increase the volume
• Make sure that the adaptor
and the phone cord are
connected properly
• Move the handset closer to
the base unit
• Make sure the handset ringer
is turned on ( is not
displayed on the LCD)