Philips CarStudio CEM5100, User Manual

Page: 14 / 30

15
English
»
[CONNECTED] is displayed if
connection is successful.
»
[FAILED] is displayed if connection is
failed.
Make a call
Note
*$ #
connection between the unit and the phone must be
active.
You can dial number through the mobile phone.
To make call through the mobile phone.
1
Use the Mobile Phone to dial and make an
outgoing call.
2
„ # [CALLING] is
displayed.
To redial number.
1
Press .
»
[REDIAL] is displayed.
2
Press / again.
»
[CALLING] is displayed and the unit
starts dialing the number dialed last
time.
Call transfer
You can transfer voice from loudspeaker to
mobile phones during call.
Press and hold until [TRANSFER] is
displayed.
»
Voice transfers from loudspeaker to mobile
phone.
5 Use bluetooth
devices
+ #
$
if bluetooth connection is available on your
phone or player.
Pairing bluetooth devices
You can pair your bluetooth device with the
unit as follows:
Note
#$% [BT
MODE] on the unit.
1
Turn on bluetooth function on your device.
2
Search for other bluetooth devices that
can pair with your device.
3
Select “Philips” in the pairing list.
4
Enter default password “0000”.
»
[PAIR OK] is displayed on the panel if
pairing is successful.
»
The paired device connect to the car
audio system automatically.
To disconnect the bluetooth
1
Press and hold MENU .
»
[BT DISCONN] is displayed.
2
Press / .
»
[DISCONN OK] is displaysedif
disconnection is successful.
To connect the bluetooth
1
Press and hold MENU .
»
[BT CONNECT] is displayed.
2
Press / .
»
[WAITING] is displayed.
EN
CEM5100_IFU_00_V2.0.indb 15 11/4/2011 9:40:48 AM