12
EN
Program radio stations
manually
1
Tune to a radio station.
2
Press
PROG
, and then press / to
select a number from 1–20.
3
Press
PROG
to confirm.
»
The preset number and the frequency
of the preset station are displayed.
4
Repeat steps 2-3 to program more
stations.
Note
•
To overwrite a programmed station, store another
station in its place.
Select a preset radio station
In tuner mode, press / to select a preset
number.
Show RDS information
Radio Data System (RDS) is a service
that allows FM stations to show additional
information.
1
Tune to an RDS station.
2
Press
DISPLAY/RDS
repeatedly to scroll
through the following information (if
available).
•
Radio text message
•
Program type
• Frequency
•
Stereo or Mono
6 Other features
Set the alarm timer
This unit can be used as an alarm clock. You can
select CD, FM, or USB as alarm source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold
SLEEP/
TIMER
for more than two seconds.
»
The hour digits are displayed and begin
to blink.
2
Press / repeatedly to set hour.
3
Press
SLEEP/TIMER
to confirm.
»
The minute digits are displayed and
begin to blink.
4
Repeat steps 2-3 to set minute, select
a source (
CD
,
FM
, or
USB
), and adjust
volume.
Note
•
If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
Press
SLEEP/TIMER
repeatedly to activate or
deactivate the alarm.
»
If timer is activated, is displayed.
Tip
•
If CD/USB source is selected, but no disc is placed or
no USB connected, the system switches to the tuner
source automatically.
Summary of Contents for BTM3160
Page 2: ......
