Page 5 of 56
Ver 1.0 Update : 2 Jun 2007
3.
CLOCK
Clock can be set in Standby mode only.
Clock will be reset after unplugging the unit. After plug on the unit the digits
"AM 12:00" will display
3.1.
Setting the clock: (REMOTE CONTROL ONLY)
Electronic tact key
PROG
combine with
ALBUM +/-
The clock can be set in either 12H or 24H
mode.
(Default as 12hrs mode)
3.1.1.
In Standby mode, press
PROG
key combine with
ALBUM +/-
. “SET CLOCK” scrolls on
the display. “24HR” and “12HR” appears for the initial clock setting.
To select 12H or 24H clock, press
ALBUM+/-
key and then press
PROG
key to confirm.
The hours digits start flashing. .Press
album+/-
key repeatedly to adjust the hours. Press
PROG
key to confirm and the minutes digits start flashing.Press
ALBUM+/-
key
repeatedly to adjust the minutes to adjust the minutes .Press
PROG
key to confirm.
3.1.2.
To exit clock setting mode without storing, press STOP key.
3.1.3.
During clock setting, if no button is pressed within 90 seconds, the system will exit clock
setting mode automatically.
Remarks
:
In clock mode number key on remote control is no function.