Page 45 of 56
Ver 1.0 Update : 2 Jun 2007
17.4.
Connecting a Mobile Phone (Headset profile, Hands free profile)
Remark:
Please complete this procedure AFTER the Wireless iPod Dock has been connected.
***(BTM288 don’t have IPOD BT dongle)
This procedure requires a mobile phone with Bluetooth capability. In order to create new
Bluetooth connection you will need some familiarity with the Bluetooth functions of your
mobile phone. Each phone operates slightly differently, so we can give only very general
guidelines in this user manual for operating mobile phone Bluetooth functions. Please take the
time to familiarize yourself with powering Bluetooth on and off, searching for, pairing with and
connecting to other Bluetooth devices.
Ensure that Bluetooth radio on your mobile phone is powered on. Please refer to the phone
user manual for details.
Place the BTM288 main unit and the mobile phone where they are no more than
5 meter
apart.
Press and hold the
ANSWER/PAIRING
button on the main unit or remote control for
3
seconds:” PAIRING” flashes on the display
Set the mobile phone to search for Bluetooth devices and follow the instructions on the phone's
screen.
Please refer to the phone user manual for details. You will recognize the BTM288 main unit
by its
Bluetooth name
"BTM288"
Select the BTM288 for pairing. When prompted for a passkey, enter
"0000"
Select the newly paired BTM288 for connection. Within a few seconds connection is
complete:
‧
-Double beep tone confirmation is heard
‧
-Main display briefly shows
"PHONE CONNECTED"
‧
Bluebooth icon
is on
Your phone is now connected to the BTM288 main unit. If the pairing cannot be completed within
one minute, the display shows "
FAILED
". Check connections and settings on your mobile phone
and try again, or refer to Troubleshooting section.
NOTE:
You do not need to pair your mobile phone every time you wish to reconnect it. You may
select "PHILIPS BTM288" for manual reconnection using the mobile phone's controls, or set
the phone to reconnect automatically.