background image

7

EN

4 Use 

Bluetooth 
devices

With this speaker, you can listen to 
audio from Bluetooth-enabled devices 
and control the incoming call through 
Bluetooth.

Connect a Bluetooth 
device

Note

 

Make sure that Bluetooth function is 
enabled on your device, and your device is 
set as visible to all other Bluetooth devices.

 

Any obstacle between this speaker 
and a Bluetooth device can reduce the 
operational range.

 

Keep away from any other electronic 
device that may cause interference.

 

The operational range between this 
speaker and a Bluetooth device is 
approximately 10 meters.

Turn on the speaker.

 

»

The blue LED indicator flashes.

On your Bluetooth device, enable 
Bluetooth and search for Bluetooth 
devices that can be paired (see the 
user manual of the device).

Select 

[Philips BT7700]

 displayed 

on your device for pairing. If 
necessary, input “0000” as the 
pairing password. 

 

»

After successful connection, the 
speaker beeps twice, and the 

LED indicator turns solid blue. 

Connect two Bluetooth 
devices simultaneously

You can pair and connect a maximum 
of two Bluetooth-enabled devices to 
the speaker at the same time.

• 

If the speaker is already connected 
to one device, press and hold   for  
two seconds to enter pairing mode.

 

»

The Bluetooth indicator flashes 
blue quickly.

 

»

The speaker is ready to pair with 
a new Bluetooth device. 

 

»

The previous device is still 
connected to the speaker. 

• 

If the speaker is connected to two 
devices at the same time and only 
one device is playing audio, press 
and hold   for two seconds to enter 
pairing mode.

 

»

The idle device is disconnected. 

 

»

The speaker is ready to pair with 
a new Bluetooth device.

• 

If the speaker is connected to 
two devices at the same time and 
neither of them is playing audio, 
press and hold 

 

for two seconds to 

enter pairing mode.

 

»

The first connected device is 
disconnected.

 

»

The speaker is ready to pair with 
a new Bluetooth device.

LED indicator

Description

Flashing blue 
quickly 

Ready for pairing 

Flashing blue 
slowly

Connecting 
the previously 
connected device

Solid blue

Connected

Summary of Contents for BT7700

















Reviews: