Philips Brilliance 170P6EB/93, Service Manual

Page: 28 / 111

28 190P6&170P6 LCD
DDC Instructions
PC
To
printer
port
(
L
T
P1
)
P rinter
P ort
To Monitor
To PC
To Monitor
D -sub/ D VI cable
DC 8 ~ 12 V
To P rinter port
Re-programming Analog DDC IC
Step 1: After initialize alignment box, connecting all cables and
box as shown in Fig. 11
Fig. 12
Step 2: Read DDC data from monitor
1 . C lick icon as shown in Fig. 11 from the tool bar to bring up
the C hannels " C onfiguration Setup" windows as shown in Fig. 12 .
Step 3: Modify DDC data (verify EDID version, week, year)
1 . C lick (new function) icon from the tool bar, bring up
Step 1 of 9 as shown in Fig. 1 5 .
E D I D 45 DDC application provides the function selection and
text change (select & fill out) from Step 1 to Step 9 .
Step 4: Modify DDC data (Monitor Serial No.)
Next 1 . C lick to step 7 , bring up Fig. 16 .
- Serial number can be filled up or be changed at this moment.
-
C lick next,Finish to exit the Step window.
3. C lick OK button to confirm your selection.
4. C lick icon (Read E D I D function) to read DDC E D I D data from
monitor. The E D I D codes will display on screen as shown in Fig. 1 4.
Fig. 16
2 . Select the DDC2 Bi as the communication channel.
As shown in Fig. 1 3.
Fig. 11
1 = P ower connector
2 = D -SUB connector
Fig. 1 3
Fig. 1 4
Fig. 1 5
D
on't
close
this
screen.
--->
Select and fill out,
If necessary.
Go to cover page