5 Turn the product on and rinse the epilating head under cold
tap water for 15 seconds (Fig. 22).
6 Shake off excess water and dry the epilating head and
attachments completely with a soft towel or tissue, or allow to
air-dry thoroughly.
7 To attach the epilating head, press it onto the handle ('click')
(Fig. 9).
Cleaning the shaving head
- Never clean or remove the shaving head or cutting unit while
the motor is ON.
- Do not apply pressure to the shaving head. Do not touch the
foil with hard objects as this may dent or damage foil or
cutters.
- Do not use the shaving head if the foil is damaged or broken,
as this may cause facial injury.
1 Be certain the product is OFF.
2 Press the release button and remove the shaving head from
the handle.
3 Pull the cutting unit out of the shaving head (Fig. 23).
4 Clean the cutting unit, foil, cutters and inside the shaving head
with the cleaning brush. Also brush away any hairs that have
collected under the trimmers.
To avoid damage, never use a brush to clean the shaving foil.
5 You can also rinse the cutting unit, inside the shaving head
and accessories under warm tap water.
6 Allow all parts to air-dry thoroughly.
7 Put the cutting unit back into the shaving head ('click').
For the best shaving performance, it is suggested to lightly oil
shaving head every six weeks by spreading a drop of mineral oil
over the foil and cutters.
Replacing the shaving head cutting unit
If the foil and/or trimmers of the cutting are worn or damaged,
do not continue to use the shaving head.
A worn or damaged cutting unit should only be replaced with an
original Philips cutting unit which is available at
www.philips.com/parts-and-accessories
. You can also call
1-800-243-7884 (in US only) or 1-866-800-9311 (in Canada only)
for assistance.
The cutting unit is a precision part. Handle with care.
1 Always turn the product OFF and remove power cord from the
electrical outlet and product before replacing the cutting unit.
2 Press the release button and remove the shaving head from
the handle.
3 Pull the cutting unit out of the shaving head (Fig. 23).
4 Place a new cutting unit into the shaving head ('click').
5 Reattach the shaving head to the handle.
6 After replacing the cutting unit, check to make sure the cutting
unit and shaving head are firmly attached before using the
epilator.
Storage
- Be sure epilator is turned OFF. Remove power cord from the
electrical outlet and handle before storing product in a safe,
dry location where it will not be crushed, banged, or subject to
damage.
- Do not wrap cord around epilator when storing.
- Store cord in a safe location where it will not be cut or
damaged.
- Do not place or store epilator where it can fall or be pulled into
a tub or sink, water or other liquid while plugged in.
- Put the body exfoliation brush protective cap on the body
exfoliation brush after use.
- Store the epilator and attachments in the pouch provided.
Accessories
For maximum shaving performance, replace the shaving head
cutting unit once a year. This replacement part can be purchased
on
www.philips.com/parts-and-accessories.
If you use the body exfoliation brush 2-3 times a week, replace it
every 3 months. This replacement parts can be purchased on
www.philips.com/store
under model number BRE394.
Assistance
For assistance, visit our website: www.philips.com/support or call
toll free 1-800-243-7884 (in US only) or 1-866-800-9311 (in
Canada only).
Disposal
- This product contains a rechargeable lithium-ion battery which
must be disposed of properly (Fig. 24).
- Contact your local town or city officials for battery disposal
information. In the US, you can also call 1-800-822-8837 or
visit
www.call2recycle.org
for battery drop-off locations (Fig.
24). In Canada, you can also call 888-224-9764 or visit
www.call2recycle.ca
for battery drop-off locations.
- For assistance, visit our website
www.philips.com/support
or
call 1-800-243-7884 toll free.
- Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
For recycling information, please contact your local waste
management facilities or visit
www.recycle.philips.com
.
Full Two-Year Warranty
Philips North America LLC (USA) and Philips Electronics Ltd
(Canada) warrant this new product (except shaving head and
body exfoliation brush) against defects in materials or
workmanship for a period of two years from the date of purchase,
and agree to repair or replace any defective product without
charge.
IMPORTANT
: This warranty does not cover damage resulting
from accident, misuse or abuse, lack of reasonable care, the
affixing of any attachment not provided with the product or loss
of parts or subjecting the product to any but the specified voltage
or batteries.*
NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES.
In order to obtain warranty service, simply go to
www.philips.com/support
for assistance. It is suggested that for
your protection you return shipments of product by insured mail,
insurance prepaid. Damage occurring during shipment is not
covered by this warranty. NOTE: No other warranty, written or
oral, is authorized by Philips North America LLC. This warranty
gives you specific legal rights, and you may also have other rights
which vary from state to state, province to province or country to
country. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above exclusion and
limitations may not apply to you.
*Read enclosed instructions carefully.
45-Day Money-Back Guarantee
If you are not fully satisfied with your product send the product
back and we’ll refund you the full purchase price.
The product must be shipped prepaid by insured mail, insurance
prepaid, have the original sales receipt, indicating purchase
price and date of purchase, and the money-back guarantee
return authorization form enclosed.
We cannot be responsible for lost mail.
The product must be postmarked no later than 45 days after the
date of purchase. Philips reserves the right to verify the
purchase price of the product and limit refunds not to exceed
suggested retail price.
To obtain money-back guarantee return authorization form, call
1-800-234-7884 (in US only) or 1-886-800-9311 (in Canada
only) for assistance.
Delivery of refund check will occur 6–8 weeks after receipt of
returned product.
