READ AND FOLLOW ALL SAFETY INSTRUCTIONS
! IMPORTANT SAFEGUARDS !
WHEN USING ELECTRICAL EQUIPMENT, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED,
INCLUDING THE FOLLOWING:
SAVE THESE INSTRUCTIONS
Ni - Cd
1.
Caution:
• High voltage will be present on the output wires and terminals if batteries are installed and inverter
connector is joined or if AC power is supplied to the switched and unswitched terminal.
• Ensure input and output primary wiring connections are made to the proper terminals. Damage to product
may occur if miswired.
• Ensure load voltage requirements (120 or 277 Vac) match the output ratings of this product or damage to
the load devices may occur.
• The batteries should be installed and charged within 8 months of manufacture’s date code. See step #6
for date code information.
2. This product is suitable for use in damp locations where the ambient temperature is 0°C through 40°C,
depending on load. See output ratings on product label for details. This product is not suitable for heated
air outlets and wet or hazardous locations.
3. Make sure all connections are in accordance with the National Electrical Code or Canadian Electrical Code
and any local regulations.
4. To reduce the risk of electric shock, disconnect both the normal and emergency power supplies and the
inverter connector of the emergency lighting inverter before servicing.
5. Do not install near gas or electric heaters.
6. An unswitched AC power source is required. The AC voltage rating of this equipment is specified on the
product label. Do not connect equipment to any other voltage.
7. Equipment should be mounted securely in locations and at heights where it will not be readily subjected to
tampering by unauthorized personnel.
8. The use of accessory equipment and replacement parts not recommended by the manufacturer may cause an
unsafe condition.
9. Do not use this equipment for other than its intended purposes.
10. The battery is field replaceable. Contact manufacturer for information on replacement. Use caution when
replacing battery. Dispose of the battery properly. Do not incinerate.
Installation and Operation Instructions
ELI-S-100
06/21/17
© Philips Emergency Lighting
WITH DIMMING CAPABILITIES
ELI SERIES EMERGENCY LIGHTING INVERTERS
THIS PRODUCT INCLUDES RECHARGEABLE LEAD-ACID BATTERIES.
THE BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY.
