manualshive.com logo in svg

Philips BM90, User Manual

Share
Download
Philips BM90 User Manual Download Page 21

19

EN

Update firmware

Warning

 

•

Always connect the speaker to AC power for firmware 

upgrade. 

 

•

Never power off the speaker or unplug the USB mass 

storage device before completion of the firmware 

upgrade.

Note

 

•

Make sure that the USB stick is FAT16/32 formatted.

1 

On your PC/Mac, go to www.philips.com/

support.

2 

Enter the model number to find the latest 

firmware upgrade files available.

  

3 

Unzip and save the upgrade files to the 

root directory of a USB stick. 

4 

Press 

USB

 to select the 

USB

 source, then 

plug the USB stick into the USB socket on 

the back of the speaker.

www.philips.com/support

 XXXX

 XXXX. zip

5 

Do not remove the USB stick, and wait for 

around 3 to 4 minutes for completion of 

the firmware upgrade.

 

»

During firmware upgrade, ‘UPGRADE’ 

is shown on the display panel.

 

»

At completion of firmware upgrade, 

‘SUCCESS’ is shown on the display 

panel.

6 

Disconnect the AC power of the speaker 

and unplug the USB stick.

7 

Connect AC power again and turn on the 

speaker.

Tip

 

•

At completion of upgrade, remember to delete the 

upgrade files from your USB stick.

Summary of Contents for BM90





























Reviews:

No comments

Brands by name

Popular brands

Load more brands