Philips BlueTouch PRP6100/02, Manual

Page: 44 / 50

- Do not throw away the BlueTouch Pain Relief Patch with the normal
household waste at the end of its life, but hand it in at an official
collection point for recycling. By doing this, you help to preserve the
environment.
guarantee and service
If you need service or information or if you have a problem, please visit
our website at www.philips.de or contact the Philips Consumer Care
Centre. Its telephone number is 0800 000 7522.
guarantee restrictions
The guarantee does not cover standard wear and tear. The guarantee
becomes invalid if the BlueTouch Pain Relief Patch is not used according to
the instructions in this user manual.
troubleshooting
This chapter summarises the most common problems you could
encounter with the BlueTouch Pain Relief Patch. If you are unable to solve
the problem with the information below, contact Philips.
Problem Possible cause Solution
The LED lights do not
go on.
The rechargeable batteries
are empty.
Recharge the BlueTouch Pain Relief Patch (see
chapter ‘Charging’).
If you charged the
BlueTouch Pain Relief Patch
and the LED lights do not
go on, the pain relief patch
is probably broken.
Contact Philips
The BlueTouch Pain
Relief Patch suddenly
switches off.
The preset treatment time
is finished.
The BlueTouch Pain Relief Patch has been
programmed to switch off automatically after the
treatment time in the selected treatment mode
has elapsed.
The rechargeable batteries
are empty.
Charge the BlueTouch Pain Relief Patch (see
chapter ‘Charging’).
The infrared sensor is
blocked.
Check the position of the patch in the strap.
Make sure the strap does not cover the infrared
sensor. If the infrared sensor is not covered but
the BlueTouch Pain Relief Patch still switches off, it
is probably broken. In that case, contact Philips.
english
44