Philips BlueTouch PRP6100/02, Manual

Page: 38 / 50

1 Mode 1 (low): press once
2 Mode 2 (medium): press twice
3 Mode 3 (high): press three times
4 O (OFF): press four times
Note: If you want to switch from mode 3 to mode 1 or 2 or from mode 2 to
mode 1, you have to press the mode button as many times as required to
reach the mode you want to select. If you do not press the required number
of times within 2 seconds, the BlueTouch Pain Relief Patch beeps twice and
switches off.
Note: If you select another mode within 2 seconds, the treatment timer is not
reset to the treatment of the newly selected mode but continues to count
down at the point where you switched to the other mode. This means that the
remaining treatment time is recalculated for the intensity and the treatment
time of the newly selected mode. For example, if you switch from mode 3
to mode 1 and the remaining treatment time in mode 3 was 5 minutes, the
remaining treatment time in mode 1 is 10 minutes. In mode 1 the intensity is
50% of that in mode 3, which means that the treatment in mode is twice as
long as in mode 3.
treatment intensity
,
In mode 1 (low), two rows of LEDs light up. The BlueTouch Pain
Relief Patch beeps once.
,
In mode 2 (medium), four rows of LEDs light up. The BlueTouch Pain
Relief Patch beeps twice.
,
In mode 3 (high), six rows of LEDs light up. The BlueTouch Pain Relief
Patch beeps three times.
Note: When you select a mode, the BlueTouch Pain Relief Patch switches on
in eye safety mode. In this mode the LEDs operate at a low light intensity
that does not harm the eyes. The BlueTouch Pain Relief Patch switches to the
intensity of the mode selected when the sensor senses skin contact.
Preparing the Bluetouch Pain Relief Patch for use
The preferred method for fastening the Pain Relief Patch to the body is by
means of one of the fabric straps. There is a special strap for treatment of
the upper back and a special strap for treatment of the lower back.
Note: Do not wear multiple layers of clothing or tight or thick clothing over the
BlueTouch Pain Relief Patch to prevent the device from switching off before
the treatment has been completed. If you wear too tight or thick clothing, the
infrared sensor will measure a too high temperature and switch off the device.
english
38