Philips BG1024, Manual

Page: 7 / 116

Trimming
The appliance comes with two trimming combs that allow you to cut
hair to 2 different lengths. Start with the 3mm trimming comb to acquire
practice with this appliance.
Comb Hair length after trimming
0.5mm skin protector 0.5mm/0.02 inch
3mm trimming comb 3mm/0.11 inch
1 Snap the trimming comb into place. Make sure that the indication on
the comb is aligned with the indication on the trimming head.
- Place the appliance at an angle of 45° onto the skin.
2 Push the on/off slide upwards to switch on the appliance.
When you trim dense hair, make slow and well-controlled movements.
3 Move the appliance against the direction of hair growth.
Note: Make sure that the flat part of the trimming comb is always fully in
contact with the skin.
Note: Do not use too much pressure.
Trimming tips
- If the hairs are longer than 20mm, you can trim them to a length of
3mm first to make trimming easier.
- The appliance works best under dry conditions. Dry your skin with e.g.
a towel when using on moist areas, such as underarms.
- Stretch the skin in sensitive areas such as the chest and the scrotum.
45º
ENGLISH
7