Philips BeNear CD6952B, User Manual

Page: 42 / 52

40
EN
Behavior of the LED display
on the base station
The table below shows you the current status
with different LED display behavior on the base
station.
LED
display
Answering
machine
status
Message status
No
display
Off --
On No message
On It is steady on when
there are 3 new
messages.
On It flashes when the
memory is full.
On It keeps scrolling when
the answering machine
is recording the
incoming message or
announcement.
On
Press / to display
the volume level.
On It flashes when you
access the answering
machine menu from
the handset, the
answering machine
remotely, or listen to
messages from the
handset.
Access the answering machine
remotely
1
Make a call to your home number with a
touch tone phone.
2
Enter
#
when you hear the announcement.
3
Enter your PIN code.
»
You now have access to your answering
machine, and you can listen to the new
messages.
Note
•
You have 2 chances to enter the correct PIN code
before your phone hangs up.
4
Press a key to carry out a function. See the
Remote access commands table below for
a list of available functions.
Note
•
When there is no message, the phone hangs up
automatically if no key is pressed for 8 seconds.
Remote access commands
Key Function
1
Repeat the current or listen to the
previous message.
2 Listen to messages.
3 Skip to the next message.
6 Delete the current message.
7 Switch the answering machine on.
(not available when you listen to the
messages).
8 Stop listening to the message.
9 Switch the answering machine off.
(not available when you listen to the
messages).