background image

User Manual BDS4622V/R and BDS4624R

56

WHERE IS SERVICE AVAILABLE?

Warranty service is available in all countries where the product is 
officially distributed by Philips Consumers Electronics Europe. In 
countries where Philips Consumers Electronics Europe does not 
distribute the product, the local Philips service organization will attempt 
to provide service (although there may be a delay if the appropriate 
spare parts and technical manual(s) are not readily available).

MAKE SURE YOU KEEP ...

Please keep your sales receipt or other document showing proof of 
purchase. Attach it to this owner's manual and keep both nearby. Also 
keep the original box and packing material in case you need to return 
your product.

BEFORE REQUESTING SERVICE ...

Please check your owner's manual before requesting service. 
Adjustments of the controls discussed there may save you a service call.

TO GET WARRANTY SERVICE, 
OR IF YOU HAVE QUESTIONS …

Please contact Philips at one of the telephone numbers below:

Austria ....................................................................  0820 901115

Belgium ....................................................................  070 253 010

Denmark ..................................................................... 3525 8761

Finland ...................................................................  09 2290 1908

France ..................................................................... 08 9165 0006

Germany .............................................................0180 5 007 532

Greece .......................................................... 0 0800 3122 1223

Ireland ........................................................................ 1 601 1161

Italy .............................................................................199 404 042

Luxembourg ............................................................  26 84 30 00

Netherlands ....................................................... 0900 0400 063

Norway ......................................................................  2270 8250

Portugal ..................................................................   2 1359 1440

Spain .........................................................................  902 888 785

Sweden ....................................................................  08 632 0016

Switzerland ...........................................................  02 2310 2116

United Kingdom ................................................. 0906 1010 017

Repair must be performed by an authorized service center or a factory 
service center. If you do not live near a factory service center, contact 
your dealer. If your dealer is an authorized service center, he will 
arrange repair.

Summary of Contents for BDS4622V





























































Reviews: