Philips BDS4622V, User Manual

Page: 24 / 60

User Manual BDS4622V/R and BDS4624R
22
5.4 BATTERY INSTALLATION
1 Slide out the battery cover.
2 Insert the two batteries (UM4).
Note:
Ensure that the polarity is as indicated by (+) and (-) inside the
battery compartment.
3 Install the battery cover back to the remote control.
5.5 EFFECTIVE RANGE OF REMOTE CONTROLL
■
Point the remove controller at the signal receiver (power indicator)
on the front panel of your plasma display.
■
Do not block the signal receiver (power indicator) on the front panel
of your plasma display.
■
The effective range of remote controller is 10M, 30° left and right
and 20° up and down, as shown above.
Notes for remote controller maintenance:
●
Avoid impact, falling or dropping of remote controller. Keep remote
controller dry and out of heat source.
●
Do not clean remote controller with volatile solvents (e.g. benzene
or thinner).
●
Check battery level when remote controller does not work
properly.
Upper
20
0
Lower
20
0