Philips BDP6100, User Manual

Page: 19 / 26

20 EN
Advanced options (clear
memory...)
1
Press .
2
Select [Setup] > [Advanced] to access the
advanced setup options.
!
[BD-Live security] : Restrict or allow
access to BD-Live (only for non-
commercial, user-created BD-Live
discs).
! [Downmix mode] : Select 2-channel
stereo audio output to a TV or to
a receiver with left and right Dolby
surround.
! [Software update] : Select to update
software from a network or from USB
storage device.
! [Clear memory] : Delete the previous
BD-Live download on the USB storage
device or SD card. A "BUDA" folder is
automatically created to store the BD-
Live download.
! [Local storage] : Select a USB storage
device or SD card to store the
<%^_
! [DivX
®
VOD Code] : Display the
DivX
®
registration code or the
deregistration code for this player.
! [Version information] : Display the
software version of this player.
! [Restore default settings] : Reset this
player to the default settings made at
the factory, except for password and
parental control level.
Note
!
You cannot restrict Internet access on commercial
Blu-ray discs.
!
Before you purchase DivX videos and play them on this
player, register this player on www.divx.com with the
DivX VOD code.
4 Update software
Before you update the software of this player,
check the current software version:
! Press , and then select [Setup] >
[Advanced] > [Version information] , and
press OK .
Update software via the
Internet
1
Connect the player to the Internet (see
"Set up a network").
2
Press , and select [Setup] .
3
Select [Advanced] > [Software update] >
[Network] .
»
If an upgrade media is detected, you
are prompted to start the update.
4
Follow the instructions on the TV screen
to update the software.
»
?
player automatically turns off and on
again.
Update software via USB
1
Check the latest software version on www.
philips.com/support.
! Search for your model and click on
"Software and drivers".
2
Download the software into a USB storage
device.
a
Unzip the download, and make sure
that the unzipped folder is named
"UPG_ALL".
b
Put the "UPG_ALL" folder in the root
directory.