11
2. Setting up the monitor
3. Toggle to the up or down to select
[PIP / PBP Mode]
, then toggle to the
right.
4. Toggle to the up or down to select
[Off]
,
[PIP]
,
[PBP 2Win]
, or
[PBP
4Win]
, then toggle to the right.
5. Now you can move backward to set
the
[Off]
,
[PIP]
,
[PBP 2Win]
, or
[PBP
4Win]
.
6. Toggle to the right to confirm your
selection.
MultiView in OSD menu
•
PIP / PBP Mode
: There are five
modes for MultiView:
[Off]
,
[PIP]
,
[PBP 2Win]
,
and
[PBP 4Win]
.
[PIP]
: Picture in Picture
Open up a sub-window
side-by-side of other
signal source.
B
A
(main)
When the sub source is
not detected:
B
A
(main)
[PBP 2Win]
: Picture by Picture
Open up a sub-window
side-by-side of other
signal sources.
B
A
(main)
When the sub source is
not detected.
A
(main)
[PBP 4Win]
: Picture by Picture
Open up three sub-
windows of other signal
sources.
C
D
B
A
(main)
When the sub sources
are not detected.
A
(main)
Note
The black strip shows on the top and
the bottom of the screen for the correct
aspect ratio when in the PBP mode.
•
PIP Size
: When PIP is activated,
there are three sub-window sizes to
choose:
[Small]
,
[Middle]
,
[Large]
.
B
A
(main)
Small
Middle
Large
•
PIP Position
: When PIP is activated,
there are four sub-window positions
to choose.
Top-Right
Bottom-Right
B
A
(main)
A
(main)
B
Top-Left
Bottom-Left
B
A
(main)
A
(main)
B
•
Swap:
The main picture source and
the sub picture source swapped on
the display.