36
8. Troubleshooting & FAQs
•
Toggle to the right to show the OSD (On
Screen Display) menu
•
Toggle to the down to select the option
"Color" then toggle to the right to enter
color setting, there are three settings as
below.
1.
Color Temperature: The six settings are
5000K, 6500K, 7500K, 8200K, 9300K
and 11500K. With settings in the 5000K
range the panel appears "warm, with a
red-white color tone", while a 11500K
temperature yields "cool, bluewhite
toning".
2.
sRGB: This is a standard setting for
ensuring correct exchange of colors
between different device (e.g. digital
cameras, Displays, printers, scanners,
etc).
3.
User Define: The user can choose his/
her preference color setting by adjusting
red, green blue color.
Note
A measurement of the color of light radiated
by an object while it is being heated. This
measurement is expressed in terms of
absolute scale, (degrees Kelvin). Lower Kevin
temperatures such as 2004K are red; higher
temperatures such as 9300K are blue. Neutral
temperature is white, at 6504K.
Q9: Can I connect my LCD Display to any
PC, workstation or Mac?
Ans.:
Yes. All Philips LCD Displays are fully
compatible with standard PCs, Macs
and workstations. You may need a cable
adapter to connect the Display to
your Mac system. Please contact your
Philips sales representative for more
information.
Q10: Are Philips LCD Displays Plug-and-
Play?
Ans.:
Yes, the Displays are Plug-and-Play
compatible with Windows 8.1/8/7, Mac
OSX
Q11: What is Image Sticking, or Image Burn-
in, or After Image, or Ghost Image in
LCD panels?
Ans.:
Uninterrupted display of still or static
images over an extended period
may cause "burn in", also known as
"after-imaging" or "ghost imaging", on
your screen. "Burn-in", "after-imaging",
or "ghost imaging" is a well-known
phenomenon in LCD panel technology.
In most cases, the "burned in" or
"atter-imaging" or "ghost imaging" will
disappear gradually over a period of
time after the power has been switched
off.
Always activate a moving screen saver
program when you leave your Display
unattended.
Always activate a periodic screen
refresh application if your LCD Display
will display unchanging static content.
Warning
Failure to activate a screen saver, or a periodic
screen refresh application may result in severe
“burn-in” or “after-image” or “ghost image”
symptoms that will not disappear and cannot be
repaired. The damage mentioned above is not
covered under your warranty.
Q12: Why is my Display not showing
sharp text,
and is displaying jagged
characters?
Ans.:
Your LCD Display works best at its
native resolution of 3440 x 1440 @
60 Hz. For best display, please use this
resolution.
Q13: How to unlock/lock my hot key?
Ans.:
Please toggle to the right for 10 seconds
to unlock/lock the hot key, by doing so,
your Display pops out “Attention” to
show the unlock/lock status as shown
below illustrators.
