29
8. Troubleshooting & FAQs
your graphic adaptor is one of the above
mentioned brands, try to download the
most updated graphic adaptor driver from
corresponding companies’ web site.
Install the driver. Remove SmartControl
Lite, and re-install it once more.
If it is still not working, we are sorry that
the graphic adaptor is not supported.
Please visit Philips website and check if
an updated SmartControl Lite driver is
available.
Q4. When I click on Product Information,
only partial information is shown, what
happened?
Ans.:
It might be your graphic card adaptor
driver is not the most updated version
which fully supporting DDC/CI interface.
Please try to download the most
updated graphic adaptor driver from
corresponding companies’ web site. Install
the driver. Remove SmartControl Lite and
re-install it once more.
Attention
Theft Deterrence is Enabled
Q5. I forgot my PIN for Theft Deterrence
Function. What can I do?
Ans.:
Philips Service center has a right to ask for
legitimate identification and authorization,
in order to establish ownership of the
Display.
Please note that the anti-theft deterrence
function is provided as a convenient free
option. Managing PIN numbers is the
sole responsibility of the individual user or
the organization who sets it. In case the
PIN number is forgotten, Philips service
center can re-set it for you at a nominal
charge after verification of ownership.
Please note that this activity is not
covered by standard warranty terms.
8.3 General FAQs
Q1: When I install my Display what should I
do if the screen shows 'Cannot display
this video mode'?
Ans.:
Recommended resolution for this Display:
1920x1080@60Hz.
•
Unplug all cables, then connect your PC to
the Display that you used previously.
•
In the Windows Start Menu, select Settings/
Control Panel. In the Control Panel
Window, select the Display icon. Inside the
Display Control Panel, select the 'Settings'
tab. Under the setting tab, in box labelled
'desktop area', move the sidebar to
1920x1080 pixels.
•
Open 'Advanced Properties' and set the
Refresh Rate to 60Hz, then click OK.
•
Restart your computer and repeat step
2 and 3 to verify that your PC is set at
1920x1080@60Hz.
•
Shut down your computer, disconnect your
old Display and reconnect your Philips LCD
Display.
•
Turn on your Display and then turn on
your PC.
Q2: What is the recommended refresh rate
for LCD Display?
Ans.:
Recommended refresh rate in LCD
Displays is 60Hz, In case of any
disturbance on screen, you can set it
up to 75Hz to see if that removes the
disturbance.
Q3: What are the .inf and .icm files on the
CD-ROM? How do I install the drivers
(.inf and .icm)?
Ans.:
These are the driver files for your
Display. Follow the instructions in your
user manual to install the drivers. Your
computer may ask you for Display drivers
(.inf and .icm files) or a driver disk when
you first install your Display. Follow the
instructions to insert the ( companion
CD-ROM) included in this package.
Summary of Contents for BDM3200FC
Page 34: ......
