User Manual BDL6545AT
RETURN TO THE CONTENTS
5.2.4. PIP MENU
Note: For Component, VGA, DVI-D and HDMI inputs only.
PIP
To turn PIP mode on/off.
Use the
UP
/
DOWN
button to make selection.
PIP input
Select the input source for the sub-picture.
Use the
UP
/
DOWN
button to make selection.
PIP change
Enlarges the smaller picture to become the main picture, and vice versa.
Use the
PLUS
/
MINUS
button to make selection. Select
Reset
and then
SET
to restore settings to factory
preset values. Press the
EXIT
button to cancel and return to the previous menu.
PIP size
Select the size of the sub picture in the PIP (Picture-in-Picture) mode.
Use the
UP
/
DOWN
button to toggle between
PIP audio
Select the audio source in the PIP (Picture-in-Picture) mode.
Use the
UP
/
DOWN
button to toggle between
•
MAIN
- Select audio from the main picture
•
Sub
- Select audio from the sub picture.
PIP reset
Reset all settings in the
PIP
menu.
Use the
PLUS
/
MINUS
button to make selection. Select
Reset
and press the
SET
button to restore
settings to factory preset values. Press the
EXIT
button to cancel and return to the previous menu.
Notes:
• The PIP function is only available under certain signal source combinations as shown in the table below.
•
Large
•
Medium
•
Small
Main picture signal source
Video
S-Video
Component
VGA
DVI-D
HDMI
OPS
