Philips BDL5587XL User Manual Download Page 24 | Manualshive

Page: 24 / 54

background image

User Manual BDL5587XL

RETURN TO THE CONTENTS

3.6. CONNECTING ANOTHER BDL5587XL DISPLAY

You can interconnect multiple BDL5587XL units to create a daisy-chain configuration for applications such as a video
wall.

Note: The number of displays that can be used in a daisy-chain configuration will depend on the resolution of the input signal being
used.

• Connect the VGA OUT connector of the display to the VGA IN connector of an additional BDL5587XL unit.

Note: You can connect up to 5 displays using the VGA OUT connectors.

• Connect the RS-232C OUT connector of the display to the RS-232C IN connector of an additional BDL5587XL unit.
• Connect the DVI-D OUT connector of the display to the DVI-D IN connector of an additional BDL5587XL unit.

Note:
• You can connect up to 9 displays using the DVI-D OUT connectors.
• To ensure optimal image quality, we recommend using a DVI cable of no more than 2 metres in length.

• Connect the IR OUT connector of the display to the IR IN connector of an additional BDL5587XL unit.

Additional BDL5587XL display

The first BDL5587XL display

«
...
22
23
24
25
26
...
»

Summary of Contents for BDL5587XL























































Reviews:

No comments

Related manuals for BDL5587XL

Brand: Barco Pages: 4

Brand: Barco Pages: 2

visomat comfort 20/40

Brand: uebe Pages: 33

Brand: uAvionix Pages: 22

Brand: Phistek Pages: 13

Brand: A1 Touch Pages: 14

Brand: ViewSonic Pages: 2

Brand: Daewoo Pages: 10

FusionAmp OLED Display

Brand: Hypex Electronics Pages: 12

Brand: TechLine Pages: 26

Brand: ViewSonic Pages: 2

Brand: Crivit Pages: 48

Brand: Radio Shack Pages: 2

Brand: Litemax Electronics Pages: 12

Brand: Greater Concepts Pages: 84

Brand: Vitek Pages: 12

Brand: Parker Pages: 4

Brand: Neltronics Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands