User Manual BDL5571V
40
4.2.5. CONFIGURATION 1 MENU
Auto adjust
Note: For the VGA input only.
Use this function to let the monitor automatically optimize the display of VGA input image.
Press the
SET/PLUS
button to open the submenu, and then press the
SET
button to adjust.
Power save
Set the monitor to reduce the power automatically.
Press the
SET/PLUS
button to open the submenu, and then press the
UP
/
DOWN
button to toggle
between
VGA
- Select
ON
to let the monitor enter DPMS mode when no signal can be detected from the
DisplayPort,
HDMI, DVI-D, and VGA inputs after three successive cycles. Use the
PLUS
/
MINUS
button
to make selection.
VIDEO
- Select
ON
to let the monitor enter power saving mode when no signal is detected from the
YPbPr inputs after three successive cycles. Use the
PLUS
/
MINUS
button to make selection.
Language
Select the language for the OSD menu.
Press the
SET/PLUS
button to open the submenu, and then press the
UP
/
DOWN
button to toggle
between
English
Deutsch
Pycc
кий
中文
Polski
Français
Italiano
Español
T
ü
rkçe
Panel saving
Choose to enable the panel saving functions to reduce the risk of the "image persistence”. Press the
SET/PLUS
button to open the submenu, and then press the
UP
/
DOWN
button to toggle between
COOLING FAN
- Select
On
and the cooling fan is turning on all the time. Select
AUTO
and the cooling
fan will turn on/off according to the temperature of monitor.
Note:
The conditions of the cooling fan is low/mid/high speed at 50/58/63 °C respectively. It would be
automatically shut down if the monitor reaches a preset critical temperature (82 °C).
